Rigidity
Integration casting
High damping structure.
High rigidity.
Less deformation.
High dynamic
The structure have been powerful advanced.
4 side supported am and saddle design and they have
3 linear guides and 2 rollers guides. (option #50
spindle)
High rigidity
High rigidity casting base to support the swiveling A/C
axis.
Full stroke support
High rigid structure has full stroke support to guarantee
the most dynamic
leveling accuracy and no bending and distortion problem.
Accuracy
Linear encoders
3 axis axial position arrange in Heidenhain/Fagor linear
encoder,
to increase position precision,
to minimize deviation in processing.
5
Axis Roller Cam rotary table
Max. speed up to 40rpm (GR800).
Zero backlash.
Ultra-high efficiency conduction.
No thermal displacement.
Long life and maintenance-free.
5
Axis DD motor drive rotary table
Max. speed up to 100rpm (GR1000).
High Toque up to 4200rpm (GR1000).
Zero backlash. No reduction mechanism.
Long life and maintenance-free.
Spindle cooler equipment
The equipment control temperature difference in ±0.1°C,
that can effective control spindle temperature.
Table |
Unit |
GR1000 |
||
Dimension |
mm |
Ø1000 |
||
Driver type |
|
DD Roller Drive |
||
Max. workpiece (Diameter x H) |
mm |
Ø1200 x 800 (A 0°) Ø1200 x 600 |
||
Max. load – Horizental / Vertical position |
kg |
1600 / 2000 |
||
T-Slot |
mm |
9X14HxP90 |
||
Travel |
||||
X axis travel |
mm |
1000 |
||
Y axis travel |
mm |
1200 |
||
Z axis travel |
mm |
700 opt: 800 / 900 |
||
Dist. between spindle nose to table |
mm |
150~850 opt: 150-950 / 150-1050 |
||
Tilting rotary table A/C axis |
||||
Motor power A/C |
kW |
14.4 + 14.4 / 14.4 |
||
Swivel angle A/C |
degree |
-120° to +120° / 360° |
||
Max. speed A/C |
rpm |
100 / 100 |
||
Clamping torque A/C |
Nm |
4200 + 4200 / 4200 |
||
Indexing accuracy A/C (without encoder) |
arc.sec |
±5" / ±5"
(encoder) |
||
Min. Increment A/C |
degree |
/ |
||
Spindle |
||||
Type |
|
Direct drive |
Build-in (HA230) |
|
Max. spindle speed |
rpm |
15000 |
18000 |
18000/24000 |
Spindle motor power(s1/max) |
kW |
20 / 59 |
20 / 62.2 |
22 / 126 |
Spindle motor torque(s1/max) |
Nm |
96 / 250 |
57 / 180 |
73.5 / 153 |
Spindle taper |
|
HSK-A63 / ISO40 |
HSK-A63 |
|
Feedrate |
||||
Rapid traverse rate (X/Y/Z) |
m/min |
36 / 36 / 36 |
||
Cutting feed rate (max) |
mm/min |
1-20000 |
||
ATC & Magazine |
||||
ATC Type |
|
Armless type |
||
Magazine capacity |
pcs |
32/64, 48/96, 60/120 |
||
Max. tool weight |
kg |
8 |
||
Max. tool length |
mm |
300 |
||
Max. tool diameter(next empty) |
mm |
75 / 125 |
||
Space & System Requirement |
||||
Pneumatic pressure |
Kgf/cm |
6 (L/min:1600) |
||
Hydraulic pressure |
Kg/cm2 |
70 |
||
Electrical power consumption |
kVA |
90 |
||
Machine weight |
kgs |
23000 |
||
Max. floor space(W*L*H) |
mm |
6200x3800x4300 |
*Specifications are subject to change without notice.
STANDARD: |
OPTION ACCESSORIES: |
lHEIDENHAIN
TNC 640 / TFT 15" LCD lEthernet
card,USB &RS-232C Interface l5 axis absolute
encoder motors l3 axis
linear scale lTilting
and Rotary table lATC 32 tools magazine l3 axis
linear guide way lCentralized
automatic lubrication system lSpindle
cooler lSpindle
air blast lCutting
coolant system lCutting
air blast lWorking
lamp and Indication lamp lElectric
cabinet air conditioner lStandard
enclosure splash guard (no roof) lCoolant
tank and coolant flushing system lWashing
gun and air gun lSteel belt
type chip conveyor and chip cart lOil
skimmer lHydraulic
pressure system lLeveling
blocks and bolts lTool kits lOperation
manual |
lHEIDENHAIN/FAGOR
5-axis controller SIEMENS/FANUC 5-axis
controller lKinematicsOPT/DCM/TCPM lAngle encoder lMagazine 24/60/120 tools lBuilt-in/Direct
drive high speed spindle lSpindle thermal
compensation system lSpindle
ring coolant spray system lTable
coolant spray system lCentralized
auto grease lubrication system lFull
enclosure splashguard lTool
length measurement system lWorkpiece
measurement system lTransformer
and Regulator lOil mist
cutting system lOil mist
collector lScraper
type chip conveyor and chip cart Integrated
type chip conveyor lCTS |
Effectiveness
3 axis moving rapid
The
highest feed at 36m/min (GR800 Plus and above).
The highest
cutting feed at 20m/min.
High speed spindle HSK-A63
Build-in spindle
speed up to 18000rpm (Grease).
Build-in
spindle speed up to 24000rpm (Oil-mist).
TCPM axis simultaneously move
TCPM to
reduce extra steps.
High precision transmission components
Mechine
adopts high precision transmission components
To each
high speed, high precision and high efficiency.
Application
GR
series is widely used in the industries of aerospace,
automotive
and mold machining.
CAD/CAM
integration
Comprehensive training class.
Cutting program, post etc,
Integrated and testing.