Overall unit with casting
Reduce the errors of manual welding, and Low deformation and High rigidity
All casting design by box-in-box
structure, light weight and increase structure rigidity.
Integrated base casting
High stability, Low deformation, High rigidity.
Double beam design
Double beam, double saddle, four linear guideway support.
Reduce structure and thermal deformation on cutting.
Double saddle design
Double saddle design, and the lengthen and widen saddle, head and beam to reduce
deformation and increase overall rigidity.
High rigidity head
Three linear guide way and one guide way, full covered with saddle.
Octagon structure and whole foundry head.
Tough and rigidity base casting
T-type structure base increase rigidity, and the strength axes design to increase rigidity and stability,
and ensure the accuracy on high speed machining.
Gantry type column and base
Column and base fixed on foundation, without loading issue and increase machining accuracy.
Double ballscrews and double servo motors
High accuracy, High reaction, High speed.
Heidenhain linear scale
3 axes with Heidenhain linear scale to increase moving accuracy and reduce machining error.
B/C axes with ring scale
Regulate swivel and tilt angle effectively.
Mechanical anti-collision device
3 axes with anti-collision device to reduce machine failure.
Axes with cooler
Regulate moving temperature any time.
Spindle cooler
Temperature control within 0.1 degree.
XY axes with linear motor
Rapid traverse 70 m/min, cutting feed rate 20m/min, rapid without back clearance.
Without interval gap between ballscrew and gear.
Direct-drive without other medium.
TCPM multi-axes synchronous control
Tool center management, reduce extra motion.
Travel |
Unit |
G2020 |
X axis travel |
mm |
2000 |
Y axis travel |
mm |
2000 |
Z axis travel |
mm |
1100 (opt:1400) |
Dist. between spindle nose to table |
mm |
50~1150 |
Distance between columns |
mm |
2840 |
Table |
||
Dimension |
mm |
2300x2000 |
Max Load |
kg |
5000 |
Spindle |
||
Type |
|
Build-in |
Max. spindle speed |
rpm |
24000 |
Spindle motor power(cont. /S6) |
kW |
37/46 |
Spindle motor torque(cont./S6) |
Nm |
60/73 |
Spindle taper |
|
HSK-A63 |
C/B axis |
||
Max. swivel speed C/B |
rpm |
30/30 (opt:50/50) |
Max. torque C/B |
Nm |
1100/575 |
Clamping torque C/B |
Nm |
1680/2160 |
Swivel angle C/B |
degree |
±200/±105 |
Feedrate |
||
Rapid traverse rate (X/Y/Z) |
m/min |
70/70/40 |
Cutting feed rate (max) |
mm/min |
1-20000 |
ATC & Maganize |
||
ATC Type |
|
Armless |
Max. tools |
pcs |
30 |
Max. diameter(next empty) |
mm |
100/180 |
Max. length |
mm |
300 |
Max. weight |
kg |
7 |
Tool shank |
|
HSK-A63 |
Space & System Requirement |
||
Pneumatic pressure |
Kgf/cm |
7 |
Hydraulic pressure |
kVA |
90 |
Electrical power consumption |
kg |
150 |
Max. floor space(W*L*H) |
mm |
4800*5300*5500 |
blank
*Specifications are subject to change without notice.
STANDARD: lHEIDENHAIN TNC 640 / TFT 15" LCD lEthernet card,USB &RS-232C Interface lFully enclosed splash guard lSpindle cooler l3 axes absolute encoder motors/XY Linear motor lATC l3 axis linear guide way lCoolant tank and coolant flushing system lCentralized automatic lubrication system lSpindle air blast lWorking lamp lIndication lamp lAnchor bolts, leveling blocks and bolts lTool kits lWashing gun and air gun lCutting coolant system lCutting air blast lOperation manuals |
OPTIONAL ACCESSORIES: lBuilt-in/Direct type high speed spindle lHeidenhain Controller lFANUC Controller lLinear scales(5 axes) lTool length measurement system(Blum) lWorkpiece measurement system lAutomatic lubrication system(Grease) lOil mist cutting system lTransformer and regulator lOil mist collector lCTS lSteel belt type chip conveyor l4th axis lOil skimmer
|
■ Integration casting, Double beams design, High rigidity ram